Olympus FS-RF11 Ring Flash Head (Needs FC-01 Flash Controller, FR-1 & SR-1)

Olympus FS-RF11 Ring Flash Head (Needs FC-01 Flash Controller, FR-1 & SR-1) Features

Additional Olympus FS-RF11 Ring Flash Head (Needs FC-01 Flash Controller, FR-1 & SR-1) Information

What Customers Say About Olympus FS-RF11 Ring Flash Head (Needs FC-01 Flash Controller, FR-1 & SR-1):

The extra light from the ring flash makes for some great portrait shots. For close up works they can't be beat. They also come on automatically for focus if you have the AF set to use the modeling lights.This is a specialized flash that can be used out to about 6 meters or so - beyond that I would switch to the FL-50. Amazon needs to correct this error because the SR-1 is hard to find anywhere. The Olympus FC-01 Macro Flash Controller (for use with TF-22 & RF-11 Flash Heads) has on it a dial for +/- 3 EV stops that controls the flashes directly.

The SR-1 is ONLY for the TF-22, in fact they say the TF-22 needs the SR-1 - the TF-22 SHIPS with the SR-1. As for a flash, it's as powerful as any GN36, but exceptionally parallel to the lens, with no shadow cast by the lens as with flashes mounted above the lens.For greater light control, the GN22 TF-22 twin flash should be used in extreme cases (and it DOES come with the SR-1 to hold the two flashes - see my reviews on the Olympus TF-22 Twin Flash Head (Needs FC-01 Flash Controller, FR-1 & SR-1) for more info there)Most people will want the ring flash first, and then get to the twin flash when their needs dictate. As with the twin flash, the ring flash has 4 modeling lights in the corners to aid in locating the flash reflection in your composition before shooting. The camera exposure control is not active when using these flashes.All together the flash system is very well designed as the high voltage power supplies work with any flash (the FL-50 and FC-01 are in the same body and accept the FP-1 and SHV-01 power supplies). The RF-11 assembly is designed to take advantage of the bayonet mount found on all 67 mm filter assemblies and the FR-1 adapter tube for the 50mm macro lens (the FR-1 forms an extention tube in front of the lens to protect the full focus extension and has the 67 mm filter thread needed for the TF-22 and also the 67mm bayonet system needed for the RF-11)I have no idea why amazon says it needs the SR-1.

It also doesn't need the FR-1 unless you have the 50mm macro lens.The RF11 will lock onto the 14-54 and the 50-200 mm lenses with just a 30 degree twist to engage the bayonets that normally hold the lens hood. It can be used down to 6 inches and below that I would switch to the TF-22.One last thing - exposure adjustment is no longer done with the +/- key on the camera when using the lens mounted flashes.